True 4 measurement eliminates lead
resistance errors
Wide measuringe range 2 milliohms
to 2 kilohms
Resolution 0.1 microhms on 2 milliohm
range
High accuracy 0.25% rdg + 0.25% fs
2 channel measurement for primary and
secondary windings
Data logging with large colour alpha
numeric storage for test results
Robust power supply for fast testing
of large power transformers
Open circuit limit mode 20mV / 50mV
maximum
Interface RS232 and USB
**This product
has been discontinued**
The DO8000 is the ideal measuring instrument for transformer
and other inductive windings. The advanced power supply ensures
that measurements are fast and stable. The two measuring channels
permit both primary and secondary windings to be measured and displayed
at the same time, and with the addition of the internal timer and
data logger cooling curves can be measured without problems.
Specification
Measurement
4 wire eliminates lead resistance
Display
LCD Graphics colour lcd display visible
in bright sunshine
Ranges
Manual / Automatic independently
selectable for each measuring channel
protection
Protected from overvoltage transients
& substation noise, High speed current interrupt detector, audible
warning during and after test, emergency stop button
Systems Interface
RS232 and USB ports
Terminals
4 mm safety sockets
Environmental
Operating temperature -10°C ... +50
°C Storage temperature -15°C ... +80 °C Relative humidity 0...90%,
non-condensing
Memory
Over 100 files with over 120 measurements
each in text files that are compatible with most spreadsheet
formats
Mains Supply
90 to 132Vac 50/60Hz, 198 to 256Vac
50/60Hz 550VA max
CE compliance
EN61010 EN61326
Dimensions
47 x 36 x 18 cm
Weight
11.4 kg
Accessories
Supplied with RS232 and USB interface,
mains cord, handbook, application software
