101A Single- and 3 Phase Power/Energy Analyzer
The 101A is suitable for measurements on electronically
switched loads. Because of its DC-coupling capability correct rms-
and power values result at all times. Take the case of line voltage
multiplied by half wave rectified current. AC-coupling yields wrong
rms current and power, DC-coupling yields correct values. The 101A
is simple to use. In the side menu you select current- and voltage
ranges (automatic or manual), synchronization, measurement time,
special function 'Peak-Hold', and display modes L1, L2, L3, SUM,
and ALL (3-phase display). In the display number fields you can
place any measured quantity from the measurement function selection
table including harmonics of current and voltage. In the graphics
field waveforms and bar graphs of current and voltage can be displayed.
A load connection box is available which connects your single- or
three phase load to the Power Analyzer and to the wall power outlet.
Optional RS-232 interface with Windows Operating Software and battery
back up for 6 hours autonomous operation is available. It prevents
data loss, such as energy data, during power failure.
LOW COST, HIGH PERFORMANCE
- Very low cost
- Unmatched price-performance
- Accuracy 0.15 %
- Connection box for easy hook-up for
commercial loads
- 600mA-60A, 30V-1000V, DC-50kHz
- Measures RMS, maximum, power, energy,
time, PF, and harmonics
- Single and three phase
- Accepts 100A start-up current Measure
- all values simultaneously
- Displays 6 or 40 values
|
 |
| Voltage |
4 ranges: 30V, 100V, 300V, 1000V,
max. 600V |
| Frequency range
- DC-50kHz |
|
Accuracy 23°K ±3°K
- 10Hz-2kHz = ±(0.1% rdg + 0.1% range)
- 2kHz-10kHz = ±(0.8% rdg + 0.3% range)
|
| Current |
5 ranges: 600mA,2A,6A,20A,60A; max.
40A continuous, max. 100A for 1 second. |
| Frequency range
- DC-50kHz |
|
Accuracy 23°K ±3°K
- 10Hz-400Hz = ±(0.15% rdg + 0.15% range)
- 400Hz-2kHz = ±(1.5% rdg + 1.0% range)
- Lowest range multiply percentage figures by 2.
|
| Power |
Accuracy: Add accuracy percentage
figures of current and voltage, PF = 0 to ±1. |
| Measured Quantities |
Vrms, Vmax, Vpeakhold, Arms, Amax,
Apeakhold, power, apparent power, power factor, energy, apparent
energy, elapsed time, voltage- and current harmonics n=1 to
20. |
| Display |
Blue liquid crystal graphic display
with EL backlight. Displays values of each phase, total values,
or values of all three phases. Displays wave forms and bar graphs. |
| Dielectric |
Inputs to case, Line input to case:
2 kV/2 kV. |
| Dimension |
H x W x D = 132 x 185 x 267 mm. Weight
2.5 kg. Tilt stand |
| Accessories |
Single- and three phase load connection
box, Carrying case and Test leads |
| Options |
- RS-232 Interface and Windows Operating Software (95, 98,
NT, 2000, ME, XP)
- Rechargeable battery for 6 hours autonomous operation
including built in charger
|
Last modified February, 2006.
|
