AEMC ML912 Simple Logger II AC Current Data Logger, 100/1000 A – Duncan Instruments Canada Ltd
AEMC ML912 Simple Logger II AC Current Data Logger, 100/1000 A

AEMC ML912 Simple Logger II AC Current Data Logger, 100/1000 A

$ 972.00 CAD $ 873.02 CAD Sale

Two channel AC recording logger includes two integral MiniFlex flexible current probes that measure from 0.5A to 1000A TRMS. Stores up to 240,000 measurements.

Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger® II Control Panel within the DataView® software).

TRMS calculations are performed on a single line cycle. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software. Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information.

An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument’s internal memory to the computer for analysis.

Features

  • Includes two integral MiniFlex® flexible current probes that will measure from 0.5A to 1000A TRMS with 0.1A resolution
  • Dual range 100/1000A user selectable per channel
  • 64 samples per cycle
  • Programmable storage rates from 8 every second to 1 every day
  • 4 user selectable storage modes
  • Stores up to 240,000 measurements in non-volatile memory
  • Powered by standard Alkaline batteries
  • Lightweight, compact, fits anywhere
  • 5 LED indicators quickly and clearly display logger status
  • Includes FREE DataView® software for data storage, real-time display, analysis and report generation
  • Isolated USB 2.0 communication cable included
  • EN 61010-1; 600V CAT IV, 1000V CAT III

Applications

  • Split phase load monitoring
  • Neutral and ground current monitoring
  • Intermittent problem detection
  • Harmonic current monitoring using DataView ® software
  • Machine load monitoring

Specifications

Channels Two
Input Captive MiniFlex® AC Current Flexible Sensors
Range and Accuracy 0.5 to 100A AC: 0 to 1A unspecified 1 to 100A: ±(1% of Reading + 0.5A
5 to 1000A AC: 0 to 5A unspecified 5 to 1000A: ±(1% of Reading + 1A)
Resolution 0.1A
Sample Rate 64 samples/cycle
Storage Rate Programmable from 8 every second to 1 every day
Storage Modes Start/Stop, FIFO, Extended Recording Mode (XRM™) and Alarm
Recording Length 15 minutes to 8 weeks, programmable using DataView®
Memory 240,000 measurement (512KB)
Data is stored in non-volatile memory and retained if the battery is low or removed
Communication USB 2.0 optically isolated

Included with the AEMC ML912

  • ML912 Simple Logger II
  • USB cable
  • DataView® software
  • 2 x 1.5V AA alkaline batteries
  • Manual
Back to Loggers and Recorders