AEMC 6550 Graphical Digital Megohmmeter with DataView Software, 10 kV – Duncan Instruments Canada Ltd
AEMC 6550 Graphical Digital Megohmmeter with DataView Software, 10 kV
AEMC 6550 Graphical Digital Megohmmeter with DataView Software, 10 kV

AEMC 6550 Graphical Digital Megohmmeter with DataView Software, 10 kV

$5,307.00 $5,646.00 Sale

This high-end, portable megohmmeter is designed for the measurement of a wide variety of electrical insulation resistance values on cables and devices operating at high voltage.

This megohmmeter is the only fully automated 10,000 V graphical insulation tester. It is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView® software provided. Can also operate on battery or AC power while testing.

It also offers the ability to program up to three step voltage profiles (from 40 to 10,000), each containing up to ten steps. There are also ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000 and 10,000 V.

Features

  • Detection and measurement of input voltage, frequency, and current prior to running a test
  • Measurements at a fixed test voltage of 500, 1000, 2500, 5000, 10,000 VDC
  • Ramp voltage measurements with a ramp from 40 to 1100 V
  • Step voltage measurements with steps from 40 to 10,000 V
  • Non-destructive (Early break) test, test stopped at a preset current (Break at I-limit) or burn mode with no predefined stop point
  • Digital filtering of insulation measurements
  • Live measurement of the voltage to warn the operator of potential unsafe conditions
  • Programmable thresholds to trigger audible
  • Timed measurement duration checks
  • Fuse protection with display indication of defective fuse condition
  • Stores up to 80,000 measurements
  • Optically-isolated USB communication for transfer onto PC and and report generation with the included DataView® software

Applications

  • Acceptance testing and preventive maintenance
  • Test motors, pumps, valves, cables, switch-gears and electrical wiring installations
  • Continuity checks
  • High resistance or absorption tests
  • Spot reading tests
  • Timed resistance measurements
  • Dielectric absorption ratio (DAR) and polarization index (PI) tests
  • Multi-layer insulation testing (DD)
  • Test old or water damaged installations over long time periods
  • Motor insulation resistance measurements

Specification

Insulation Test Voltage 500 V: 10 kΩ to 2000 GΩ (2 TΩ)
1000 V: 10 kΩ to 4000 GΩ (4 TΩ)
2500 V: 10 kΩ to 10,000 GΩ (10 TΩ)
5000 V: 10 kΩ to 15,000 GΩ (15 TΩ)
10,000 V: 10 kΩ to 25,000 GΩ (25 TΩ)
Fixed Test Voltages 500/1000/2500/5000/10,000 V
Variable Voltages 40 V to 10 kV Three user programmable voltage schemes
Ramp Mode Programmable ramps: start voltage/end voltage/duration
Ramp Configuration Range 40 to 1100 V/500 to 10,000 V
Step Mode Up to 10 steps (voltage and duration configurable for each step)
Voltage Measurement After Test 0 to 2500 V AC
0 to 4000 V DC
Capacitance Measurement 0.05 to 9.999 µF/10.00 to 49.99 µF
Leakage Current Measurement 0 to 8 mA
Discharge After Test Yes/Automatic

 

Included with the AEMC 6550

  • Graphical Digital Megohmmeter
  • Small, Classic Tool Bag
  • Set of 3 9' Integral Leads (Red, Blue, and Black) and Alligator Clips, 1000 V CAT IV
  • Set of 2 Test Probes (Red & Black), 1000 V CAT IV
  • Optical USB Cable
  • US Power Cord, 115 V
  • 2 x NiMH Batteries
  • USB Stick with DataView Software and Manual

Downloads