| Voltage DC |
| Maximum Voltage |
1000 V |
| Accuracy |
±(0.2% + 2) |
| Maximum Resolution |
0.001 V |
| Voltage AC |
| Maximum Voltage |
1000 V |
| Accuracy |
±(2% + 3) |
| Maximum Resolution |
0.1 mV |
| Current DC |
| Maximum Amps |
400 mA |
| Amps Accuracy |
±(1.0% + 2) |
| Maximum Resolution |
0.01 mA |
| Current AC |
| Maximum Amps |
400 mA |
| Amps Accuracy |
±(2.0% + 2) |
| Maximum Resolution |
0.01 mA |
| Resistance |
| Maximum Resistance |
50 MΩ |
| Accuracy |
±(1.2% + 2) |
| Maximum Resolution |
0.1 Ω |
| Insulation Test |
| Minimum Test Current at 1 kΩ/V |
1 mA |
| Test Voltages |
500, 1000 V |
| Maximum Resistance per Test Voltage |
50 V
100 V
250 V
500 V
1000 V: 600 MΩ |
| Maximum Resolution per Test Voltage |
50 V: 0.01 MΩ
100 V: 0.01 MΩ
250 V: 0.1 MΩ
500 V: 0.1 MΩ
1000 V: 0.1 MΩ |
| Accuracy per Test Voltage |
50 V: ±(3% + 5)
100 V: ±(3% + 5)
250 V: ±(1.5% + 5)
500 V: ±(2.0% + 5)
1000 V: ±(2.0% + 5) |
| Environmental Specifications |
| Operating Temperature |
-4 to 131°F (–20 to 55°C) |
| Storage Temperature |
-40 to 140°F (-40 to 60°C) |
| Humidity (Without Condensation) |
0 to 95%: 50 to 86°F (10 to 30°C)
0 to 75%: 86 to 104°F (30 to 40°C)
0 to 40%: 104 to 131°F (40 to 55°C) |
| Operating Altitude |
6561.68' (2000 m) |
| Mechanical and General Specifications |
| Battery Life Alkaline |
Meter use: 1000 hours
Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off |
| Dimensions |
7.99 x 3.94 x 1.97" (203 x 100 x 50 mm) (with holster) |
| Weight |
22 oz (624 g) |
| IP Rating |
IP40 |
| Safety Specifications |
| Overvoltage Category |
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V |
| Agency Approvals |
2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V |
